Hyperlite State 2.0 Mens Wakeboard Review (2026): A Spec-Based Look
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This hyperlite state 2 0 mens wakeboard review examines a board built for riders who need a stable platform. The listing specifies a 135 cm length and a width of 20 inches. These dimensions create a wide footprint that aids balance. The board weighs 20 pounds, which affects how it feels in the air. It comes with Remix bindings sized for boot sizes 7 to 10.5. The color scheme is black and blue. You get a wakeboard designed for consistent performance. The specs point to a board that prioritizes stability over extreme maneuverability. This setup suits riders who value predictability.
What stands out
- 135 cm length provides a stable ride plane
- 20-inch width offers enhanced balance for landings
- Remix bindings included, fitting sizes 7-10.5
- 20-pound weight balances float and control
Who it fits
Good fit for
This wakeboard suits intermediate riders who prefer a forgiving board. The 20-inch width helps you stay upright during jumps. The 135 cm length offers a good mix of glide and control. Riders with boot sizes between 7 and 10.5 will find the included Remix bindings fit well. If you want a board that feels solid underfoot without being too twitchy, this spec sheet aligns with your needs. It is also good for riders who prioritize stability.
Who should skip it
Riders with boot sizes smaller than 7 or larger than 10.5 should look elsewhere. The included Remix bindings will not fit your feet securely. If you prefer a narrower board for sharper turns, the 20-inch width may feel too wide. Smaller riders might find the 20-pound weight heavy for advanced tricks. This board is not designed for extreme freestyle where a lighter, narrower profile is preferred. Check your boot size first.
Verdict: The Hyperlite State 2.0 135cm offers a stable, wide platform for riders who prioritize balance. It is a solid choice for those with medium-sized boots who want a predictable ride.
Key specs explained
Board Length 135 cm
This length provides a stable platform for riders. A 135 cm board offers a good balance between control and maneuverability. You will find this size suitable for intermediate riders who want stability without sacrificing too much agility. When comparing paddle boards, consider how length affects tracking and turning radius in your typical water conditions.
Width 20 inches
A 20-inch width creates a wide footprint that aids balance. This generous width makes the board more forgiving for beginners or riders recovering from a fall. You will appreciate the extra stability when standing up or performing basic maneuvers. Compare this width with narrower boards to understand the trade-off between stability and speed in your riding style.
Weight 20 pounds
Weighing 20 pounds makes this board relatively light for its size. You will find it easier to carry to and from the water compared to heavier models. This weight is manageable for most adults, reducing fatigue during transport. When shopping, compare this weight to other boards in the same category to ensure it fits your physical capability for carrying gear.
Binding Size 7-10.5
The included bindings fit boot sizes from 7 to 10.5. This range covers a broad spectrum of adult foot sizes, ensuring a secure fit for many riders. You should check your boot size before purchasing to confirm compatibility. Compare this binding range with other boards to ensure the equipment matches your footwear, avoiding the need for separate binding purchases.
Design and build details
According to the listing, the Hyperlite State 2.0 measures 59.3 inches in length and 20 inches in width. The profile stands 9.25 inches tall. These specific dimensions define the board’s physical footprint. The width provides a broad stance, which helps you maintain balance while riding. The length offers a stable platform for turns and jumps. You get a consistent surface area for your feet.
The board weighs 20 pounds. This mass affects how the board responds in the water. A heavier board may feel more stable at speed but requires more effort to lift. The listing notes a Black/Blue color scheme. This finish is purely aesthetic and does not impact performance. The model number 22274254 identifies this specific variant.
The package includes Remix Bindings sized for boots between 7 and 10.5. This range covers a broad spectrum of foot sizes. The bindings are essential for transferring your movements to the board. You must ensure your boot size fits within this limit. The design prioritizes a secure fit for intermediate riders. The specs suggest a focus on stability rather than extreme agility. You should check your boot size before purchasing to ensure compatibility.
Setup and everyday use
The Hyperlite State 2.0 arrives with Remix bindings pre-installed, which simplifies your initial setup. The listing specifies a binding size range of 7 to 10.5, covering a broad spectrum of boot sizes. This means you likely do not need to purchase separate bindings or adjust complex mounting systems before your first ride. You can attach your boots directly to the integrated setup.
Daily use begins with understanding the board’s physical presence. At 135 cm in length and 20 inches in width, the board offers a substantial surface area. This width supports a wider stance, which improves stability as you plan your wakeboarding sessions. The 59.3-inch length provides a consistent platform for tracking through the water. You will notice the 9.25-inch height contributes to the board’s profile, affecting how it sits in the water and responds to your weight distribution.
Handling the board requires consideration of its mass. The listing states a weight of 20 pounds. This mass helps maintain momentum once you are up on the water, but it also means you will carry a moderate load when moving between the dock and the water. The black and blue color scheme is a cosmetic detail that does not affect performance. The model number 22274254 identifies this specific configuration. You should verify that your boot size falls within the 7 to 10.5 range to ensure a secure fit. Proper fit ensures efficient energy transfer from your legs to the board edges, allowing for precise turns and jumps without slippage. The fixed binding size eliminates guesswork regarding compatibility with standard wakeboard boots.
Before You Buy The State 2.0
You should verify that your boat’s wakeboard tower or cable system supports a 135 cm board. This length requires adequate clearance to avoid striking obstacles during launches. Check that your bindings match the included Remix setup or plan for compatible replacements if your boot size falls outside the 7 to 10.5 range. The 20-pound weight suggests you may need a sturdy strap for transport, as it is not featherlight. Rinse the board with fresh water after each session to preserve the black and blue finish. Store it in a cool, dry place to prevent delamination. This model sits firmly in the intermediate category. It offers more stability than smaller boards but lacks the high-performance edge of pro-level setups. If you prioritize consistent balance over aggressive tricks, this spec aligns with your needs. Compare its 20-inch width against narrower options if you prefer sharper turns. Ensure your current gear complements this stable platform.
Check before you buy
- Verify tower clearance for the 135 cm length
- Confirm boot size fits the 7-10.5 binding range
- Check if you need additional transport straps
- Ensure storage space handles the 20 lb weight
The product at a glance
Hyperlite State 2.0 135cm Wakeboard with Remix Bindings
Best for: Riders with boot sizes 7-10.5
- Board Length
- 135 cm
- Binding Size
- 7-10.5
- Board Style
- Wakeboard
- Dimensions
- 59.3 × 20 × 9.25 inches
- Weight
- 20 pounds
View on Amazon: Hyperlite State 2.0 135cm Wakeboard with Remix Bindings Affiliate link
The Hyperlite State 2.0 is a 135 cm wakeboard designed for riders with boot sizes 7 to 10.5. It measures 20 inches wide and weighs 20 pounds. The black and blue finish suits your style. This size offers a balance of stability and maneuverability. It is a solid option for intermediate to advanced riders who want a responsive board for jumps and spins.
Pros
- 135 cm length provides good control
- 20-inch width offers stability
- 20-pound weight is manageable
- Fits boot sizes 7-10.5
Cons
- Limited size range for larger boots
- Standard weight may feel heavy for small riders
- No specific flex pattern listed
Good fit if
- You wear boot sizes 7 to 10.5
- You want a stable 135 cm board
- You prefer a 20-inch width
Skip if
- You need bindings for size 11 or larger
- You prefer a shorter board under 130 cm
- You want a lighter board under 18 pounds
Verdict: Hyperlite State 2.0 Wakeboard 135cm fits riders with medium-sized boots who prioritize stability. The 135 cm length and 20-inch width make it reliable for carving and landing jumps.
Specifications side by side
| Spec | Hyperlite State 2.0 135cm Wakeboard with Remix Bindings |
|---|---|
| Board Length | 135 cm |
| Binding Size | 7-10.5 |
| Board Style | Wakeboard |
| Dimensions | 59.3 × 20 × 9.25 inches |
| Weight | 20 pounds |
| Size | 135cm/7-10.5 |
| Color | Black/Blue |
| Model | 22274254 |
Frequently asked questions
Is the Hyperlite State 2.0 good for beginners?
Yes, the 135 cm length provides a stable platform suitable for intermediate riders. The 20-inch width creates a broad stance that aids balance. This design helps you maintain control while learning to carve or land jumps. The included Remix bindings simplify your initial setup, removing the need for separate purchases.
What size boots fit the Hyperlite State 2.0?
This board is designed for riders with boot sizes 7 to 10.5. The listing specifies this range to ensure a secure fit. You likely do not need to purchase separate bindings if your boots fall within this spectrum. The pre-installed Remix bindings cover this broad range of foot sizes.
How heavy is the Hyperlite State 2.0 wakeboard?
The board weighs 20 pounds. This weight contributes to its stability on the water. The 135 cm length and 20-inch width create a substantial footprint. This mass helps you maintain balance during carving and landing jumps, providing a reliable platform for your rides.
What are the exact dimensions of the board?
The board measures 135 cm in length and 20 inches in width. It stands 9.25 inches tall. These specific dimensions define the physical footprint. The 59.3-inch length offers a balance between control and maneuverability. The 20-inch width provides a stable base for your stance.
Does it come with bindings?
Yes, the Hyperlite State 2.0 arrives with Remix bindings pre-installed. This simplifies your initial setup on the water. The bindings are sized for boot sizes 7 to 10.5. You likely do not need to purchase separate bindings or adjust your setup before your first ride.
Is the 135 cm length suitable for carving?
Yes, the 135 cm length and 20-inch width make it reliable for carving. The wide footprint aids balance during turns. This size offers a good balance between control and maneuverability. You will find this configuration suitable for riders who prioritize stability without sacrificing too much agility on the water.