Morey Mach 7 PE Core Alternatives: 6 Similar Picks Compared

Morey Mach 7 PE Core Alternatives Compared

BZ 45” Big Bruddah Bodyboard

The BZ Big Bruddah measures 45 inches long with a 13.8-inch width. This board targets larger riders over 200 pounds who need extra buoyancy and stability. It uses a polypropylene core, which differs from the Mach 7's polyethylene core. The double stringers provide added stiffness compared to the single REX stringer in the Morey. You get an HDPE slick bottom for speed, similar to the Mach 7. The wider profile offers more planing surface area. If you are heavier or prefer a longer board for mushy waves, this alternative provides better float. It sacrifices the specific flex pattern of the single stringer for enhanced durability and load-bearing capacity. This pick suits those prioritizing size and weight support over the compact maneuverability of the 42-inch Mach 7.

BZ T-10 42-Inch Crescent Tail Bodyboard

The BZ T-10 shares the 42-inch length and polyethylene core with the Mach 7. It also features a crescent tail and HDPE slick bottom. However, it weighs only 4.35 pounds, making it significantly lighter than the 7.74-pound Morey. This board uses a Phuzion core for responsiveness. The rigid polyethylene deck offers a different feel than the soft NXLPE deck on the Mach 7. You get a lighter board that may feel quicker in the water. The T-10 gives up the premium comfort of the NXLPE skin. It is a budget-friendly option that maintains core durability. If you want a lighter PE core board with a similar shape, this model delivers. It suits riders who prioritize low weight and responsive handling over the plush deck comfort of the Morey Mach 7.

Morey Mach 10 Crescent Tail Bodyboard

The Morey Mach 10 measures 42 inches long but weighs less due to its lightweight core. It features a Surlyn bottom instead of the Mach 7's HDPE slick. This material choice aims to increase speed and reduce drag. The board uses a single stringer for flex control, similar to the Mach 7. It has a crescent tail for edge control. The Mach 10 is designed for advanced riders seeking speed. You get a faster ride in critical wave sections. It sacrifices the durable NXLPE deck and PE core comfort of the Mach 7. The Surlyn bottom requires more maintenance. This pick suits experienced surfers who prioritize speed and sharp turns. If you want a high-performance board with a similar length but faster slick material, the Mach 10 is the upgrade. It trades comfort for performance.

THURSO SURF 42" PE Core Bodyboard

The Thurso Surf 42-inch board shares the 42-inch length and polyethylene core with the Mach 7. It also uses an HDPE slick bottom. This board weighs 9.44 pounds, making it heavier than the Mach 7. It features a heat-laminated construction for durability. The deck style is similar to the Mach 7. You get a stable option for riders under 200 pounds. The included accessories add value. It sacrifices the NXLPE deck comfort for a standard deck. The heavier weight may affect maneuverability. This pick suits beginners and intermediate riders who want a durable, stable board. If you prioritize grip and flexibility in a heavier package, this model works. It offers a similar core and slick material but with a different weight profile and construction method. It is a solid choice for those seeking a complete package.

Contour SURF 42" PE Core Bodyboard

The Contour SURF 42-inch board has a polyethylene core and HDPE slick bottom, matching the Mach 7's core and slick materials. It measures 41.7 inches long and 21.7 inches wide. This board weighs only 3.75 pounds, making it much lighter than the 7.74-pound Morey. The light weight aids in speed and maneuverability. It suits riders up to 200 pounds. You get a stable ride with sharp turn capabilities. It sacrifices the NXLPE deck comfort and the specific single stringer flex of the Mach 7. The lighter construction may feel less durable in the long run. This pick suits riders who prioritize speed and low weight. If you want a PE core board that is easy to carry and quick in the water, this model is ideal. It offers similar core specs with a focus on lightness.

BZ Morey Mach 7X 42.5" Crescent Tail Bodyboard

The BZ Morey Mach 7X measures 42.5 inches long, slightly longer than the 42-inch Mach 7. It features a crescent tail and HDPE slick bottom, similar to the Morey. This board is built for intermediate riders in warm water. It offers a stiff, responsive ride. The deck style is comparable to the Mach 7. You get a board designed for fluidity in barreling waves. It sacrifices the NXLPE deck comfort and the specific PE core feel of the original Mach 7. The longer length provides more stability. This pick suits riders who prefer a stiffer board for warm water conditions. If you want a Mach 7-like shape with a focus on warm water performance, this model works. It offers a similar tail and slick material but with a different core and deck combination. It is a good alternative for those seeking a responsive warm water board.

Quick picks

Our 7 picks

1 Best overall

Morey Mach 7 PE Core Bodyboard

Best for: Intermediate riders seeking durable PE core comfort

Board Length

42"

Core Material

Polyethylene (PE)

Slick Material

HDPE

Stringers

Single REX Stringer

Deck Material

NXLPE

Tail Shape

Crescent Tail

View on Amazon: Morey Mach 7 PE Core Bodyboard Affiliate link

The Morey Mach 7 is a 42-inch bodyboard built for intermediate riders. It features a durable Polyethylene core and a soft NXLPE deck for comfort. A single REX stringer adds internal reinforcement for better flex control. The HDPE slick and crescent tail design help with speed and edge control. This board suits those seeking a trusted, performance-oriented option for beach riding.

Pros

• Durable Polyethylene core provides stable feel and recoil
• Soft NXLPE deck resists wear and reduces skin irritation
• Single REX stringer enhances durability and energy transfer
• HDPE slick and crescent tail improve edge control

Cons

• Only available in one size for the anniversary edition
• Single stringer may offer less rigidity than dual setups
• No specific weight limit data provided for rider matching

Good fit if

• You want a trusted brand with decades of refinement
• You prefer a soft deck for long sessions
• You ride in cool to moderate water temperatures

Skip if

• You need multiple size options for a perfect fit
• You require a dual stringer for maximum rigidity
• You are a beginner seeking the most forgiving board

Verdict: Morey Mach 7 42" Bodyboard offers a reliable PE core and comfortable NXLPE deck for intermediate riders. It fits those who value proven durability and specific flex control in moderate conditions.

2 Also great

BZ 45” Big Bruddah Bodyboard

Best for: larger riders seeking lightweight durability

Board Length

45"

Core Material

Zero-G Polypro

Slick Material

HDPE

Stringers

VFS Double Stringers

Deck Material

8lb H-Cell

Tail Shape

Crescent Tail

View on Amazon: BZ 45” Big Bruddah Bodyboard Affiliate link

This BZ bodyboard measures 45 inches long and supports riders up to 225 pounds. It uses a Zero-G Polypro core and an 8lb H-Cell deck for durability. The HDPE slick bottom reduces friction for speed. You get a crescent tail and VFS double stringers for control. This board suits larger riders who want a lightweight yet robust option for beach surfing.

Pros

• Zero-G Polypro core for lightweight strength
• Supports riders up to 225 lbs
• HDPE slick bottom reduces water friction
• VFS double stringers add core rigidity

Cons

• Mesh-free design lacks traditional mesh reinforcement
• Limited to three color options
• No leash plug mentioned in specifications

Good fit if

• You weigh up to 225 pounds
• You prefer a lightweight polypropylene core
• You want a 45-inch crescent tail board

Skip if

• You need mesh reinforcement for extra durability
• You are under 150 pounds and want a smaller board
• You require a board with a specified leash plug

Verdict: BZ Big Bruddah 45" Bodyboard fits larger riders seeking a lightweight polypropylene core board. The HDPE slick bottom and double stringers provide speed and control for those over 200 pounds.

3 Also great

BZ T-10 42-Inch Crescent Tail Bodyboard

Best for: Riders seeking durable polyethylene decks and responsive cores

Board Length

42"

Core Material

PE Core

Slick Material

HDPE

Stringers

RCS Single Stringer

Deck Material

8lb Green Cell

Tail Shape

Crescent Tail

View on Amazon: BZ T-10 42-Inch Crescent Tail Bodyboard Affiliate link

The BZ T-10 is a 42-inch bodyboard built for performance in challenging conditions. It features an 8lb Green Cell polyethylene deck for rigidity and an HDPE slick with grip channels for control. The Phuzion core offers recoil in colder water, while the RCS single stringer adds stiffness. The crescent tail provides fluidity in barreling or shore break waves. This board suits riders seeking durability and speed.

Pros

• 8lb Green Cell polyethylene deck for better grip and rigidity
• HDPE slick with grip channels boosts board control and speed
• Phuzion core provides great recoil in colder surf conditions
• RCS single stringer adds essential strength and stiffness
• Crescent tail reduces contact for better fluidity in close-out waves

Cons

• Single stringer offers less structural reinforcement than dual or triple stringers
• 42-inch length may be too small for very tall or heavy riders
• Weight of 4.35 pounds is higher than some lightweight foam alternatives

Good fit if

• You want a durable polyethylene deck that resists wear in rough surf
• You ride in colder water where core recoil helps with performance
• You prefer a crescent tail for better flow in barreling or shore break waves

Skip if

• You need a lightweight board for easy carrying and transport
• You prefer a larger 45-inch board for extra buoyancy and stability
• You want a board with multiple stringers for maximum stiffness

Verdict: The BZ T-10 42" Bodyboard delivers a rigid polyethylene deck and a responsive Phuzion core for riders who prioritize control and durability in challenging surf. It fits those who value a crescent tail's fluidity over maximum buoyancy.

4 Also great

Morey Mach 10 Crescent Tail Bodyboard

Best for: advanced riders seeking speed and edge control

Board Length

40"

Slick Material

Surlyn

Stringers

Single CFT Stringer

Deck Material

NXLPE

Tail Shape

Crescent Tail

Length

42 inches

View on Amazon: Morey Mach 10 Crescent Tail Bodyboard Affiliate link

The Morey Mach 10 Pro Series is a 42-inch bodyboard built for intermediate to advanced riders. It features a premium polypropylene core for lightweight buoyancy and a Surlyn slick bottom to reduce drag. The NXLPE deck offers comfort, while a single CFT stringer provides flex control. This model includes graduated channels near the tail to enhance edge control and maintain speed during rides.

Pros

• Surlyn slick bottom reduces drag for maximum speed
• Premium polypropylene core is waterproof and ultra-lightweight
• NXLPE deck provides soft comfort and durability
• Single CFT stringer maximizes durability and flex control
• Graduated channels enhance edge control and prevent side slipping

Cons

• Only one stringer compared to multi-stringer competitors
• 42-inch length may be large for smaller riders
• No remote or app connectivity features included

Good fit if

• You want a board with a high-performance Surlyn slick bottom
• You prefer a lightweight polypropylene core for better buoyancy
• You need a single stringer setup for specific flex control

Skip if

• You require multiple stringers for maximum stiffness
• You need a board smaller than 40 inches
• You prefer a board with electronic connectivity features

Verdict: Morey Mach 10 42" Pro Series delivers speed through its Surlyn bottom and lightweight core. It suits advanced riders who prioritize edge control and a single stringer flex pattern over multi-stringer stiffness.

5 Best budget

THURSO SURF 42" PE Core Bodyboard

Best for: beginners and intermediate riders under 200 lbs

Board Length

42"

Core Material

PE Core

Slick Material

HDPE

Stringers

2 FRP stringers

Deck Material

IXPE

Tail Shape

Crescent Tail

View on Amazon: THURSO SURF 42" PE Core Bodyboard Affiliate link

This 42-inch bodyboard features a PE core with two FRP stringers for flexibility and buoyancy. The IXPE deck includes channel nose bulbs for grip, while the HDPE slick bottom offers speed. It supports riders up to 200 lbs and weighs 9.44 pounds. The package includes a stainless steel coiled leash and a carry bag. It suits beginners and intermediate surfers seeking stable performance.

Pros

• PE core with 2 FRP stringers for flexibility
• HDPE slick bottom with dual channels
• IXPE deck with channel nose bulbs
• Includes stainless steel coiled leash and bag

Cons

• 200 lbs weight capacity is lower than larger boards
• 9.44 lbs weight may feel heavy for small children
• Plastic mesh reinforcement is less durable than fiberglass

Good fit if

• You are a beginner or intermediate rider
• You weigh under 200 lbs
• You want a stable 42-inch board

Skip if

• You weigh over 200 lbs
• You prefer a fiberglass mesh core
• You need a board for very small children

Verdict: Thurso Surf 42" Bodyboard is a stable option for riders under 200 lbs who prioritize grip and flexibility. It fits beginners and intermediate surfers who want a durable, heat-laminated board with included accessories.

6

Contour SURF 42" PE Core Bodyboard

Best for: Riders up to 200 lbs seeking speed

Board Length

42"

Slick Material

HDPE

Stringers

Two embedded FRP stringers

Deck Material

IXPE

Tail Shape

Crescent tail

Mesh Reinforcement

Mesh reinforcement

View on Amazon: Contour SURF 42" PE Core Bodyboard Affiliate link

This 42-inch bodyboard features a lightweight PE core and HDPE slick bottom for responsive glide. The IXPE deck includes nose bulbs for grip, while two FRP stringers enhance flex and control. It supports riders up to 200 lbs and includes a stainless steel swivel leash. The crescent tail and mesh reinforcement aid sharp turns. This setup offers stability for various skill levels in warm or cold water.

Pros

• Lightweight PE core for responsive performance
• HDPE slick bottom with dual channels
• Two embedded FRP stringers for flex
• IXPE deck with nose bulbs for grip
• Supports riders up to 200 lbs

Cons

• Heavier than some foam alternatives
• Standard 1-year warranty period
• No included carry bag

Good fit if

• You want a durable board for cold water
• You prefer a crescent tail for speed
• You need support for heavier riders

Skip if

• You ride in very small waves
• You prefer a shorter board for tricks
• You want a board under 3.5 lbs

Verdict: Contour SURF 42" Bodyboard provides a stable ride with a durable PE core and HDPE slick. It suits riders up to 200 lbs who want sharp turns and reliable control in various conditions.

7 Best premium

BZ Morey Mach 7X 42.5" Crescent Tail Bodyboard

Best for: Intermediate riders in warm water

Board Length

42.5"

Core Material

Polypro

Slick Material

HDPE

Stringers

Power Rod Stringer

Deck Material

TC8

Tail Shape

Crescent Tail

View on Amazon: BZ Morey Mach 7X 42.5" Crescent Tail Bodyboard Affiliate link

This BZ bodyboard features a 42.5-inch polypropylene core and TC8 deck. The X-Flex mesh adds spring while preventing over-flexing. An HDPE slick and crescent tail improve fluidity in barreling waves. The Power Rod stringer reinforces the structure. This setup suits intermediate riders in warm waters. Beginners may find the stiffness challenging to control.

Pros

• Polypropylene core is 100% hydrophobic and stiff
• TC8 deck offers high durability in big waves
• X-Flex mesh adds spring and prevents over-flexing
• HDPE slick provides amazing flexural stiffness
• Crescent tail increases fluidity in close-out conditions

Cons

• Polypro core is stiff and hard for beginners to control
• 42.5-inch length is shorter than some alternatives
• Orange color option only

Good fit if

• You ride temperate to warm waters
• You want a hydrophobic core to resist water absorption
• You need a crescent tail for barreling waves

Skip if

• You are a beginner bodyboarder
• You prefer a longer board for stability
• You surf in cold waters requiring neoprene

Verdict: BZ Morey Mach 7X 42.5" Bodyboard is built for intermediate riders who need a stiff, responsive board for warm water conditions. It suits those who prioritize durability and fluidity in barreling waves over beginner-friendly forgiveness.

Specifications side by side

Frequently asked questions

See also

• best laptops with Intel Core 7
• keystone core 18 alternatives